Public function

Functions
void	remotetemp_cfg_setup (remotetemp_cfg_t *cfg)
	Config Object Initialization function.
REMOTETEMP_RETVAL	remotetemp_init (remotetemp_t *ctx, remotetemp_cfg_t *cfg)
	Initialization function.
void	remotetemp_default_cfg (remotetemp_t *ctx)
	Click Default Configuration function.
void	remotetemp_generic_write (remotetemp_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
	Generic write function.
void	remotetemp_generic_read (remotetemp_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
	Generic read function.
uint8_t	remotetemp_int_get (remotetemp_t *ctx)
	Getting state of INT pin.
uint8_t	remotetemp_an_get (remotetemp_t *ctx)
	Getting state of AN pin.
uint8_t	remotetemp_set_range (remotetemp_t *ctx, uint8_t range_setting)
	Setting temperature range.
void	remotetemp_read (remotetemp_t *ctx, uint8_t register_address, uint8_t *read_buffer, uint8_t n_bytes)
	Reads register content.
void	remotetemp_write (remotetemp_t *ctx, uint8_t register_address, uint8_t *register_values, uint8_t n_bytes)
	Setting register content.
void	remotetemp_set_int_diode_high_limit (remotetemp_t *ctx, int16_t limit_value)
	Setting Internal diode high limit.
void	remotetemp_set_int_diode_low_limit (remotetemp_t *ctx, int16_t limit_value)
	Setting Internal diode low limit.
void	remotetemp_set_ext_diode_high_limit (remotetemp_t *ctx, int16_t limit_value, uint8_t diode)
	Setting external diodes high limit.
void	remotetemp_set_ext_diode_low_limit (remotetemp_t *ctx, int16_t limit_value, uint8_t diode)
	Setting external diodes low limit.
void	remotetemp_set_ext_diode_therm_limit (remotetemp_t *ctx, int16_t limit_value, uint8_t diode)
	Setting external diodes thermal limits.
void	remotetemp_set_int_diode_therm_limit (remotetemp_t *ctx, int16_t limit_value)
	Setting internal diodes thermal limits.
float	remotetemp_get_internal_diode (remotetemp_t *ctx)
	Getting internal diode temperature value.
float	remotetemp_get_external_diode (remotetemp_t *ctx, uint8_t diode)
	Getting external diode temperature value.
float	remotetemp_get_hottest_diode (remotetemp_t *ctx)
	Getting hottest diode temperature value.

Detailed Description

Function Documentation

remotetemp_an_get()

uint8_t remotetemp_an_get

(

remotetemp_t *

ctx

)

Getting state of AN pin.

Parameters

ctx	Click object.

Returns

0 if AN pin is in LOW state.

1 if AN pin is in HIGH state.

@description This function gets state of AN pin.

remotetemp_cfg_setup()

void remotetemp_cfg_setup

(

remotetemp_cfg_t *

cfg

)

Config Object Initialization function.

Parameters

cfg	Click configuration structure.

@description This function initializes Click configuration structure to init state.

Note

All used pins will be set to unconnected state.

remotetemp_default_cfg()

void remotetemp_default_cfg

(

remotetemp_t *

ctx

)

Click Default Configuration function.

Parameters

ctx	Click object.

@description This function executes default configuration for RemoteTemp Click.

remotetemp_generic_read()

void remotetemp_generic_read	(	remotetemp_t *	ctx,
		uint8_t	reg,
		uint8_t *	data_buf,
		uint8_t	len )

Generic read function.

Parameters

ctx	Click object.
reg	Register address.
data_buf	Output data buf
len	Number of the bytes to be read

@description This function reads data from the desired register.

remotetemp_generic_write()

void remotetemp_generic_write	(	remotetemp_t *	ctx,
		uint8_t	reg,
		uint8_t *	data_buf,
		uint8_t	len )

Generic write function.

Parameters

ctx	Click object.
reg	Register address.
data_buf	Data buf to be written.
len	Number of the bytes in data buf.

@description This function writes data to the desired register.

remotetemp_get_external_diode()

float remotetemp_get_external_diode	(	remotetemp_t *	ctx,
		uint8_t	diode )

Getting external diode temperature value.

Parameters

ctx	Click object.
diode	Diode number.

Returns

float - external diode temperature value

@description This function reads external diode registers and calculates temperature value.

remotetemp_get_hottest_diode()

float remotetemp_get_hottest_diode

(

remotetemp_t *

ctx

)

Getting hottest diode temperature value.

Parameters

ctx	Click object.

Returns

float - hottest diode temperature value

@description This function reads hottest diode registers and calculates temperature value.

remotetemp_get_internal_diode()

float remotetemp_get_internal_diode

(

remotetemp_t *

ctx

)

Getting internal diode temperature value.

Parameters

ctx	Click object.

Returns

float - internal diode temperature value

@description This function reads internal diode registers and calculates temperature value.

remotetemp_init()

REMOTETEMP_RETVAL remotetemp_init	(	remotetemp_t *	ctx,
		remotetemp_cfg_t *	cfg )

Initialization function.

Parameters

ctx	Click object.
cfg	Click configuration structure.

@description This function initializes all necessary pins and peripherals used for this Click.

remotetemp_int_get()

uint8_t remotetemp_int_get

(

remotetemp_t *

ctx

)

Getting state of INT pin.

Parameters

ctx	Click object.

Returns

0 if INT pin is in LOW state.

1 if INT pin is in HIGH state.

@description This function gets state of INT pin.

remotetemp_read()

void remotetemp_read	(	remotetemp_t *	ctx,
		uint8_t	register_address,
		uint8_t *	read_buffer,
		uint8_t	n_bytes )

Reads register content.

Parameters

ctx	Click object.
register_address	Sets temperature range.
read_buffer	Buffer for storing register content.
n_bytes	Number of registers(bytes) to read.

Returns

none

@description This function reads content from register(s).

remotetemp_set_ext_diode_high_limit()

void remotetemp_set_ext_diode_high_limit	(	remotetemp_t *	ctx,
		int16_t	limit_value,
		uint8_t	diode )

Setting external diodes high limit.

Parameters

ctx	Click object.
limit_value	Threshold value.
diode	Diode number.

Returns

none

@description This function sets high threshold value for external diodes.

remotetemp_set_ext_diode_low_limit()

void remotetemp_set_ext_diode_low_limit	(	remotetemp_t *	ctx,
		int16_t	limit_value,
		uint8_t	diode )

Setting external diodes low limit.

Parameters

ctx	Click object.
limit_value	Threshold value.
diode	Diode number.

Returns

none

@description This function sets low threshold values for external diodes.

remotetemp_set_ext_diode_therm_limit()

void remotetemp_set_ext_diode_therm_limit	(	remotetemp_t *	ctx,
		int16_t	limit_value,
		uint8_t	diode )

Setting external diodes thermal limits.

Parameters

ctx	Click object.
limit_value	Threshold value.
diode	Diode number.

Returns

none

@description This function sets thermal threshold values for external diodes.

remotetemp_set_int_diode_high_limit()

void remotetemp_set_int_diode_high_limit	(	remotetemp_t *	ctx,
		int16_t	limit_value )

Setting Internal diode high limit.

Parameters

ctx	Click object.
limit_value	Threshold value.

Returns

none

@description This function sets high threshold value for internal diode.

remotetemp_set_int_diode_low_limit()

void remotetemp_set_int_diode_low_limit	(	remotetemp_t *	ctx,
		int16_t	limit_value )

Setting Internal diode low limit.

Parameters

ctx	Click object.
limit_value	Threshold value.

Returns

none

@description This function sets low threshold value for internal diode.

remotetemp_set_int_diode_therm_limit()

void remotetemp_set_int_diode_therm_limit	(	remotetemp_t *	ctx,
		int16_t	limit_value )

Setting internal diodes thermal limits.

Parameters

ctx	Click object.
limit_value	Threshold value.

Returns

none

@description This function sets thermal threshold value for internal diode.

remotetemp_set_range()

uint8_t remotetemp_set_range	(	remotetemp_t *	ctx,
		uint8_t	range_setting )

Setting temperature range.

Parameters

ctx	Click object.
range_setting	Sets temperature range.

Returns

0 for successful range parameter.

1 for invalid range parameter.

@description This function sets temperature range (( from 0 to 127 ) or ( from (-64) to 191 )).

remotetemp_write()

void remotetemp_write	(	remotetemp_t *	ctx,
		uint8_t	register_address,
		uint8_t *	register_values,
		uint8_t	n_bytes )

Setting register content.

Parameters

ctx	Click object.
register_address	Address of the (first) register to write to.
register_values	Buffer for storing register content.
n_bytes	Number of registers(bytes) to read.

Returns

none

@description This function writes content to register(s).